0.1 um Hydrophilic PTFE syringe filters
0.22 um Hydrophilic PTFE syringe filters
0.45 um Hydrophilic PTFE syringe filters
China Hydrophilic PTFE syringe filters

Hydrophilic PTFE 0.22/0.45 um IC Syringe Filters

Hawach hydrophilic PTFE syringe filters stand up to the most aggressive solvent, acid, and base samples. Female Luer lock inlet, male slip outlet (50mm is hose barb). PTFE syringe filter product numbers ending with "B" are hydrophobic; all other
PTFE syringe filters are hydrophilic.

Descripton of PTFE Syringe Filters

If the sample contains a lot of particles or viscous impurities, 0.45um syringe filter with a pre-filter membrane is your ideal choice. The pre-filtration membrane filter adds a layer of pre-filtration membrane before the membrane of the ordinary syringe filter to protect the microporous membrane. The material is 1um Glass Fiber or PP. Hawach also provides no pre-filter for your need.

The pre-filtration membrane can remove particulate impurities while preventing sticky impurities from clogging the filter. The pre-filter membrane is made of chemically inert materials and is resistant to most solvents. The rigidity of the membrane and the structure of large specific surface area have the characteristics of small retention capacity and low resistance, so the pre-filtration membrane filter can maintain high flux even when processing difficult-to-filter samples.

IC syringe filters are common to both aqueous and organic solvents. Ion chromatography, which is commonly used in environmental analysis, also requires that no inorganic contaminants be introduced in sample pretreatment. Like sterile CA syringe filters, hydrophilic PTFE syringe filter can be used in HPLC analysis and IC analysis to filter sample solutions, which is a sample pretreatment process important step in the process.

Just like the hydrophobic PTFE syringe filter, the hydrophilic PTFE syringe filter also has a high flow rate, filtration accuracy as well as great resistance to chemicals and high temperature. Nevertheless, it possesses strong and permanent hydrophilicity without the need for pre-wetting. PTFE 0.45 um filter could be widely applied in the pharmaceutical industry for sterile filtration of various water-soluble solvents, including eye drops and antibiotics. Meanwhile, 0.45um syringe filter is also perfect for the sterile filtration of highly corrosive solvents and organic solvents.

Features of Hydrophilic PTFE Syringe Filters

hydrophilic ptfe syringe filtersHydrophilic syringe filter
•Passed ISO9001 certification
•Diameter: 4mm, 13mm, 25mm, 33mm, 50mm
•Pore size: 0.22um, 0.45um
•Stepped barb or NPT (Vent)
•Lowest level of IC extractable
•Female Luer Lock - Male Luer Slip
•Syringe filters for ion chromatography
•High standard production environment and strict quality control

Applications of 0.22 0.45 um IC syringe filters

•Teflon syringe filter is compatible with: aggressive solvents, strong acids, alcohols, bases, aromatics
•Cleaning of small volume samples for HPLC or GC application
•Venting applications & degassing solvents
•Incompatible with: HF, Perchloric acid, Methylene chloride (limited exposure), Dioxane, DMF, formic acid > 50%

Syringe Filters for Ion Chromatography (IC) on Ion extractable test (Filstar series Hydrophilic PTFE Syringe Filter)

IC syringe filters are the best choice for ion analysis and consistent results. Its high retention efficiency for fine particles can extend the life of the IC instrument. IC syringe filter with a very low ion interference low background value. Using ultrasonic welding technology, no leakage risk.

Analysis of Syringe Filters for Ion Chromatography
1. Sample
Material Diameter Pore Size
Hydrophilic PTFE Φ25mm 0.22μm
Φ25mm 0.45μm

Note: Φ25mm syringe filter because the filter area is larger than Φ13mm, the ion dissolution is also higher, so as the highest ion dissolution of the sample for testing.
2. Experimental Method
Teflon syringe filter is filtered 3ml ultra-pure water, the first 1ml discard, collect the first 2ml filter water and go on tested by IC Cl-, NO3-, SO42-. Each sample was repeated three times. Ultra-pure water directly tested by IC act as blank sample for comparison.
3. Instruments
Shimadzu Ion Chromatograph HIC-SP / HIC-NS (as the right picture)
4. Test Results
Pore Size Ion 1# 2# 3#
0.22μm Cl- ND ND ND
SO42- ND ND ND
NO3- ND ND ND
0.45μm Cl- ND ND ND
SO42- ND ND ND
NO3- ND ND ND
Technical Data of PTFE 0.45um Filter
Filter Media Hydrophilic PTFE
Diameter 4mm 13mm 25mm 33mm 50mm
Housing Medical PP Medical PP Medical PP Medical PP Medical PP
Pore Size 0.22μm, 0.45μm
Filtration Area 0.2cm2 1.3cm2 4.9cm2 8.5cm2 19.8cm2
Maximum Pressure 5.2bar 5.2bar 5.2bar 5.2bar 5.2bar
Process Volume 2mL 10mL 100mL 200mL 5000mL
Pre-filter 1um GF or PP 1um GF or PP 1um GF or PP 1um GF or PP 1um GF or PP
Hold-up Volume < 10uL < 50uL < 100uL < 200uL < 350uL
Inlet Female Luer Lock Female Luer Lock Female Luer Lock Female Luer Lock Stepped barb
Outlet Male luer slip Male luer slip Male luer slip Male luer slip Stepped barb
Operate temperature 60℃
 
Instruction Drawing
syringe filters analysis chart
Ordering Information of Syringe Filter PTFE
Item Code Pore Size(μm) Diameter(mm) Sterile Pre-filter Quantity/pk
SLPT0422NL 0.22 4 No No 100pcs
SLPT0445NL 0.45 4 No No 100pcs
SLPT1322NL 0.22 13 No No 100pcs
SLPT1345NL 0.45 13 No No 100pcs
SLPT1322NP 0.22 13 No PP 100pcs
SLPT1345NP 0.45 13 No PP 100pcs
SLPT1322NLG 0.22 13 No GF 100pcs
SLPT1345NLG 0.45 13 No GF 100pcs
SLPT2522NL 0.22 25 No No 100pcs
SLPT2545NL 0.45 25 No No 100pcs
SLPT2522NLP 0.22 25 No PP 100pcs
SLPT2545NLP 0.45 25 No PP 100pcs
SLPT2522NLG 0.22 25 No GF 100pcs
SLPT2545NLG 0.45 25 No GF 100pcs
SLPT3322NL 0.22 33 No No 50pcs
SLPT3345NL 0.45 33 No No 50pcs
SLPT3322NLP 0.22 33 No PP 50pcs
SLPT3345NLP 0.45 33 No PP 50pcs
SLPT3322NLG 0.22 33 No GF 50pcs
SLPT3345NLG 0.45 33 No GF 50pcs
SLPT5022NL 0.22 50 No No 25pcs
SLPT5045NL 0.45 50 No No 25pcs
SLPT5022NLP 0.22 50 No PP 25pcs
SLPT5045NLP 0.45 50 No PP 25pcs
SLPT5022NLG 0.22 50 No GF 25pcs
SLPT5045NLG 0.45 50 No GF 25pcs