Hydrophilic PTFE Syringe Filters

•Passed ISO9001 certification
•Pore size: 0.22um, 0.45um
•Diameter: 4mm, 13mm, 25mm, 33mm, 50mm

Select: Hydrophilic PTFE Syringe Filters, Disposable Hydrophilic PTFE Syringe Filters, Sterile Hydrophilic PTFE Syringe Filters

1. Hydrophilic PTFE Syringe Filters

Descripton of Hydrophilic PTFE Syringe Filters

What is PTFE syringe? If the sample contains a lot of particles or viscous impurities, 0.45um syringe filter with a pre-filter membrane is your ideal choice. The pre-filtration membrane can remove particulate impurities while preventing sticky impurities from clogging the filter.

Just like the hydrophobic PTFE syringe filter, the hydrophilic PTFE filter also has a high flow rate, filtration accuracy as well as great resistance to chemicals and high temperature. Nevertheless, it possesses strong and permanent hydrophilicity without the need for pre-wetting. IC syringe filters are common to both aqueous and organic solvents.

Features

•Syringe filters for ion chromatography
•Excellent filtering and removing impurities
•High throughput for improved filtration efficiency
•Like CA syringe filters, hydrophilic PTFE syringe filter, High standard production environment and strict quality control.

Applications of Teflon syringe filters

•Venting applications
•Teflon syringe filter is compatible with: aggressive solvents, strong acids, alcohols, bases, aromatics

Hawach the filters stand up to the most aggressive solvent, acid, and base samples. Female Luer lock inlet, male slip outlet (50mm is hose barb). The product numbers ending with "B" are hydrophobic; all other PTFE filters are hydrophilic.

Syringe Filters for Ion Chromatography (IC) on Ion Extractable Test

The filter is the best choice for ion analysis and consistent results. Its high retention efficiency for fine particles can extend the life of the IC instrument. IC syringe filter with a very low ion interference low background value. Using ultrasonic welding technology, no leakage risk.

Analysis for Ion Chromatography
1. Sample

Material	Diameter	Pore Size
Hydrophilic PTFE	Φ25mm	0.22μm
Hydrophilic PTFE	Φ25mm	0.45μm

Note: Φ25mm filter because the filter area is larger than Φ13mm, the ion dissolution is also higher, so as the highest ion dissolution of the sample for testing.
2. Experimental Method
Teflon syringe filter is filtered 3ml ultra-pure water, the first 1ml discard, collect the first 2ml filter water and go on tested by IC Cl-, NO3-, SO42-. Each sample was repeated three times. Ultra-pure water directly tested by IC act as blank sample for comparison.
3. Instruments
Shimadzu Ion Chromatograph HIC-SP / HIC-NS (as the right picture)
4. Test Results

Pore Size	Ion	1#	2#	3#
0.22μm	Cl -	ND	ND	ND
	SO₄ 2-	ND	ND	ND
	NO 3-	ND	ND	ND
0.45μm	Cl -	ND	ND	ND
	SO₄ 2-	ND	ND	ND
	NO 3-	ND	ND	ND

Technical Data of PTFE 0.45um Filter

Filter Media	Hydrophilic PTFE
Diameter	4mm	13mm	25mm	33mm	50mm
Housing	Medical PP	Medical PP	Medical PP	Medical PP	Medical PP
Pore Size	0.22μm, 0.45μm
Filtration Area	0.2cm²	1.3cm²	4.9cm²	8.5cm²	19.8cm²
Maximum Pressure	5.2bar	5.2bar	5.2bar	5.2bar	5.2bar
Process Volume	2mL	10mL	100mL	200mL	5000mL
Pre-filter	1um GF or PP	1um GF or PP	1um GF or PP	1um GF or PP	1um GF or PP
Hold-up Volume	< 10uL	< 50uL	< 100uL	< 200uL	< 350uL
Inlet	Female Luer Lock	Female Luer Lock	Female Luer Lock	Female Luer Lock	Stepped barb
Outlet	Male luer slip	Male luer slip	Male luer slip	Male luer slip	Stepped barb
Operate temperature	60°C

Ordering Information of Syringe Filter PTFE

Item Code	Pore Size(μm)	Diameter(mm)	Sterile	Pre-filter	Quantity/pk
SLPT1322NL	0.22	13	No	No	100pcs
SLPT1345NL	0.45	13	No	No	100pcs
SLPT1322NP	0.22	13	No	PP	100pcs
SLPT1345NP	0.45	13	No	PP	100pcs
SLPT1322NLG	0.22	13	No	GF	100pcs
SLPT1345NLG	0.45	13	No	GF	100pcs
SLPT2522NL	0.22	25	No	No	100pcs
SLPT2545NL	0.45	25	No	No	100pcs
SLPT2522NLP	0.22	25	No	PP	100pcs
SLPT2545NLP	0.45	25	No	PP	100pcs
SLPT2522NLG	0.22	25	No	GF	100pcs
SLPT2545NLG	0.45	25	No	GF	100pcs

Download All Ordering Information

2. Disposable Hydrophilic PTFE Syringe Filters

Description of Disposable Non Sterile Hydrophilic PTFE Syringe Filters

The filters made from PTFE Hydrophilic membrane, which are used for many routine preparations in laboratories all over the world. PTFE syringe filters are convenient, disposables for filtration of liquids and removal of particles from solutions and gases. Different from sterile hydrophilic PTFE syringe filters, disposable hydrophilic PTFE syringe filters is a non sterile PTFE syringe filter and easy to use. Hawach PTFE-L syringe filters with pore size of 0.22μm are golden, and syringe filter with pore size of 0.45μm is pink.

Features of Nonsterile PTFE syringe filters

•Low residual rate
•Nonsterile PTFE syringe filters
•Disposable PTFE hydrophilic filters have two diameter(13mm,25mm)
•The color is easy to distinguish, gold color is 0.22μm and pink color is 0.45μm disposable PTFE syringe filter

Advantages of 0.22 um Hydrophilic PTFE Syringe Filters

•Luer lock inlet provides strong PTFE syringe connection to withstand filtration pressure at 6.2bar
•Medical grade PP housing with low extractable, no contaminant to samples
•Quantity break pricing for greater savings

Applications

•Cleaning of small volume samples for HPLC or GC application

Technical Data

Filter Media	Hydrophilic PTFE
Pore Size	0.22μm	0.45μm
Diameter	13mm	25mm
Housing	Medical PP	Medical PP
Bubble Point	0.3Mpa	0.10Mpa
Filtration Area	1.0cm2	4.3cm2
Maximum Operating Pressure	6.2bar	6.2bar
Process Volume	10mL	100mL
Hold-up Volume	< 25μL	< 100μL
Inlet	Female Luer Lock	Female Luer Lock
Outlet	Male Luer Unlock	Male Luer Unlock
Flow Direction	Flow should enter from the inlet
Maximum Operating Temperature	60°C
Sterilization	Autoclave at 121°C at 1 bar for 20 minutes/EO/Gamma

Ordering Information

Item Code	Pore Size(μm)	Diameter(mm)	Sterile	Quantity/pk
WPT1322NL	0.22	13	No	100pcs
WPT1345NL	0.45	13	No	100pcs
WPT2522NL	0.22	25	No	100pcs
WPT2545NL	0.45	25	No	100pcs

3. Sterile Hydrophilic PTFE Syringe Filters

Description of 0.22μm, 0.45μm Sterile Filters

Sterile filter is a kind of filter connected to the front end of the syringe. Ion chromatography, which is commonly used in environmental analysis, also requires that no inorganic pollutants be introduced in sample pretreatment. The hydrophilic PTFE syringe filter 0.22μm, 0.45μm can instead of PES, N6, PVDF syringe filter, is used for high temperature liquid filtration with excellent biological safety, chemical inertness, low adsorption and high temperature resistance. The pore diameter is 0.22μm/0.45μm, the flux is large, the strength is high, and the high temperature does not fall off. Each PTFE filters is individually packaged and suitable for high sterilization requirements.

Features of 0.22/0.45 um PTFE Syringe Filters

•Sterile filter
•0.22/0.45 um PTFE syringe filters
•Excellent particle retention performance
•Optimizing background levels in sensitive IC analyses
•Broad chemical compatibility and flexibility in the lab

Applications of Sterile Hydrophilic PTFE Syringe Filters

Sterile hydrophilic PTFE syringe filters are widely used in the following： •Incompatible with: HF, Perchloric acid, Methylene chloride (limited exposure), Dioxane, DMF, formic acid > 50%

Technical Data

Filter Media	Sterile Hydrophilic PTFE
Pore Size, μm	0.22μm, 0.45μm
Diameter	4mm	13mm	25mm	33mm	50mm
Housing	Medical PP	Medical PP	Medical PP	Medical PP	Medical PP
Filtration Area	0.2cm2	1.3cm2	4.9cm2	8.5cm2	19.8cm2
Maximum Pressure	5.2bar	5.2bar	5.2bar	5.2bar	5.2bar
Process Volume	2mL	10mL	100mL	200mL	5000mL
Hold-up Volume	< 10μL	< 50μL	< 100μL	< 200μL	< 350μL
Inlet	Female Luer Lock	Female Luer Lock	Female Luer Lock	Female Luer Lock	Both inlet and outlet is 7-13mm stepped hose barb connection with 6:100 Luer slip
Outlet	Male luer slip	Male luer slip	Male luer slip	Male luer slip
Flow Direction	Flow should enter from the inlet				Both is fine
Maximum Operating Temperature	60°C
Sterilization	Gamma Irradiation
Endotoxin	≦0.25 EU/ML

Ordering Information

Item Code	Pore Size(μm)	Diameter(mm)	Sterile	Pre-filter	Quantity/pk
SLPT1322SL	0.22	13	Yes	No	100pcs
SLPT1345SL	0.45	13	Yes	No	100pcs
SLPT1322SP	0.22	13	Yes	PP	100pcs
SLPT1345SP	0.45	13	Yes	PP	100pcs
SLPT1322SLG	0.22	13	Yes	GF	100pcs
SLPT1345SLG	0.45	13	Yes	GF	100pcs
SLPT2522SL	0.22	25	Yes	No	100pcs
SLPT2545SL	0.45	25	Yes	No	100pcs
SLPT2522SLP	0.22	25	Yes	PP	100pcs
SLPT2545SLP	0.45	25	Yes	PP	100pcs
SLPT2522SLG	0.22	25	Yes	GF	100pcs
SLPT2545SLG	0.45	25	Yes	GF	100pcs

Download All Ordering Information