0.22um Disposable Hydrophobic PTFE Syringe Filters
0.22 Hydrophobic PTFE Syringe Filters
0.45micron Hydrophobic PTFE Syringe Filters
0.45um Disposable Hydrophobic PTFE Syringe Filters
Disposable Hydrophobic PTFE Syringe Filters

Winstar Series Hydrophobic PTFE Syringe Filters

Filter Media: Hydrophilic PES
Diameter: 13mm, 25mm
Pore Size: 0.22μm, 0.45μm
Housing: Medical PP

Description of 0.45 μm PTFE Syringe Filter

Hawach WINSTARTM disposable PTFE syringe filters with pore size of 0.22μm are purple, and syringe filter with pore size of 0.45μm is orange. PTFE syringe filter is widely used in biological, chemical, electronics, medical and other fields.
PTFE syringe filters are automatically produced by ultrasonic welding, 100,000-level purification workshop, HPLC, IC and integrity testing support, to ensure the stability and reliability of product quality.

Polytetrafluoroethylene (PTFE) is an effective filter for solvent chemicals and other non-aqueous solutions. Wide range of chemical compatibility, strong chemical stability, and inert PTFE membrane, especially suitable for the filtration of corrosive, strong acid, and strong alkali chemicals. Ethanol and water can also be added to make it hydrophilic. Hawach has two port sizes of disposable syringe filter Teflon are 0.22 μm and 0.45 μm.

0.45 μm PTFE syringe filter membrane is made of PTFE, which is completely natural and permanently hydrophobic. Even under a very low-pressure difference, it can ensure the unimpeded passage of moist air or other gases, while the aqueous solution cannot pass through. Its performance is just the opposite of that of the disposable PTFE hydrophilic filters membrane. PTFE syringe filter 0.22 micron membrane has strong chemical compatibility, and it can filter almost all organic solvents and strong corrosive chemicals. When the water phase solution must be filtered with PTFE membrane, it must be pre-soaked with ethanol or isopropanol before the water phase solution can be filtered.

Features of PTFE Syringe Filter 0.22 Micron

•Diameter (13mm, 25mm)
•Pore size (0.22μm, 0.45μm)
•Two color of purple and orange
•Wide chemical compatibility range
•Color-coded design make easier for identification

Applications of Disposable Syringe Filters Teflon

•Aerosol sampling
•Degassing solvents
•Vacuum pump line protection
•Aggressive solvents, acids, and bases
•Filter organic-based HPLC samples
•Filter viscous organic-based HPLC samples
•Venting applications, sterilize air, gases, aerosols
•Suitable for the filtration of corrosive, strong acid, and strong alkali chemicals
Technical Data
Filter Media Hydrophobic PTFE
Pore Size 0.22μm 0.45μm
Diameter 13mm 25mm
Housing Medical PP Medical PP
Bubble Point 0.13Mpa 0.10Mpa
Filtration Area 1.0cm2 4.3cm2
Maximum Operating Pressure 6.2bar 6.2bar
Process Volume 10mL 100mL
Hold-up Volume < 25μL < 100μL
Inlet Female Luer Lock Female Luer Lock
Outlet Male Luer Unlock Male Luer Unlock
Flow Direction Flow should enter from the inlet
Maximum Operating Temperature 60℃
Sterilization Autoclave at 121℃ at 1 bar for 20 minutes/EO/Gamma

Ordering Information
Item Code Pore Size(μm) Diameter(mm) Sterile Quantity/pk
WPT1322NB 0.22 13 No 100pcs
WPT1345NB 0.45 13 No 100pcs
WPT2522NB 0.22 25 No 100pcs
WPT2545NB 0.45 25 No 100pcs