0.1 um PTFE syringe filters
0.22 um PTFE syringe filters
0.45 um PTFE syringe filters
China micro Hydrophobic PTFE syringe filters
0.22um Disposable Hydrophobic PTFE Syringe Filters
0.22 Hydrophobic PTFE Syringe Filters
0.45micron Hydrophobic PTFE Syringe Filters
0.45um Disposable Hydrophobic PTFE Syringe Filters
Disposable Hydrophobic PTFE Syringe Filters
Hydrophobic PTEF sterile Syringe Filters
0.45 PTFE sterile Syringe Filter for Lab
0.22 PTFE sterile Syringe Filter for HPLC

PTFE Syringe Filter

Filter Media: Hydrophobic PTFE
Housing: Medical PP
Diameter: 4mm, 13mm, 25mm, 33mm, 50mm
Pore Size: 0.1μm, 0.22μm, 0.45μm, 1.0μm, 3.0μm, 5.0μm, 10μm
Availability: In Stock


Select:  Advanced Series PTFE Syringe Filter,  Disposable PTFE Syringe Filter,  Sterile PTFE Syringe Filter

Advanced Series PTFE Syringe Filter

Description of PTFE Syringe Filter

PTFE syringe filter is made of imported PTFE hydrophobic membranes, almost chemically resistant to all solvents such as strong acids, alcohols, bases, and aromatics. Hydrophobic PTFE syringe filters are widely used in biological, electronic, medical, and chemical industries and can also be used to prevent moisture from passing through air vents. It is also used for gas sterilization, dust removal, and impurity removal.

There is no doubt that the hydrophobic PTFE syringe filter is equipped with inherent hydrophobicity. More importantly, it is strongly resistant to chemical solutions and high temperatures. Besides, it is also featured with a high flow rate while possessing superior filtration accuracy at the same time. During the filtration process, it is easy to be found the dissolution is quite low. Its higher opening ratio allows for greater throughput at the same filtration accuracy or higher filtration accuracy at the same throughput. The hydrophobic PTFE membrane is very suitable for hydrophobic membrane for medical, the filtration of gas, organic solvents, and chemicals with high purity, and strong corrosiveness. The tolerance of the hydrophobic PTFE syringe filter is greater than glass fiber syringe filter and PP syringe filter.

Features of Hydrophobic PTFE Syringe Filter

•Integral, permanently hydrophobic PTFE membranes
Hydrophobic gas filter
•Syringe filter with diameter from 0.1μm to 10.0μm

Advantages

Hydrophobic PTFE sterile air filter
•Permits optimal utilization of small sample volumes
•Extremely high chemical resistance against organic HPLC solvents
•Luer lock inlet Tip make sure secure connection and avoid filter blow off

Applications

•Aerosol sampling
Hydrophobic membrane for medical
•Filter organic-based HPLC samples
Technical Data
Filter Media Hydrophobic PTFE
Diameter 4mm 13mm 25mm 33mm 50mm
Housing Medical PP Medical PP Medical PP Medical PP Medical PP
Pore Size 0.1μm, 0.22μm, 0.45μm, 1.0μm, 3.0μm, 5.0μm, 10μm
Filtration Area 0.2cm2 1.3cm2 4.9cm2 8.5cm2 19.8cm2
Maximum Pressure 5.2bar 5.2bar 5.2bar 5.2bar 5.2bar
Process Volume 2mL 10mL 100mL 200mL 5000mL
Pre-filter 1μm GF or PP 1μm GF or PP 1μm GF or PP 1μm GF or PP 1μm GF or PP
Hold-up Volume < 10μL < 50μL < 100μL < 200μL < 350μL
Inlet Female Luer Lock Female Luer Lock Female Luer Lock Female Luer Lock Stepped barb
Outlet Male luer slip Male luer slip Male luer slip Male luer slip Stepped barb
Ordering Information
Item Code Pore Size(μm) Diameter(mm) Sterile Pre-filter Quantity/pk
SLPT1322NB 0.22 13 No No 100pcs
SLPT1345NB 0.45 13 No No 100pcs
SLPT1322NP 0.22 13 No PP 100pcs
SLPT1345NP 0.45 13 No PP 100pcs
SLPT1322NG 0.22 13 No GF 100pcs
SLPT1345NG 0.45 13 No GF 100pcs
SLPT2522NB 0.22 25 No No 100pcs
SLPT2545NB 0.45 25 No No 100pcs
SLPT2522NP 0.22 25 No PP 100pcs
SLPT2545NP 0.45 25 No PP 100pcs
SLPT2522NG 0.22 25 No GF 100pcs
SLPT2545NG 0.45 25 No GF 100pcs
Download All Ordering Information

Disposable PTFE Syringe Filter

Description of Disposable PTFE Syringe Filter

Hawach disposable PTFE syringe filter with pore size of 0.22μm is purple, and with pore size of 0.45μm is orange. Polytetrafluoroethylene (PTFE) is an effective filter for solvent chemicals and other non-aqueous solutions. Wide range of chemical compatibility, strong chemical stability, and inert PTFE membrane, especially suitable for the filtration of corrosive, strong acid, and strong alkali chemicals. Ethanol and water can also be added to make it hydrophilic. Hawach has two port sizes of disposable syringe filter Teflon are 0.22 μm and 0.45 μm. 0.45 μm PTFE syringe filter membrane is made of PTFE, which is completely natural and permanently hydrophobic. Even under a very low-pressure difference, PTFE syringe filter 0.22 micron, 0.45 micron can ensure the unimpeded passage of moist air or other gases, while the aqueous solution cannot pass through. Its performance is just the opposite of that of the disposable PTFE hydrophilic filters membrane.

Features of Disposable PTFE Syringe Filter

  • •Diameter (13mm, 25mm)
  • •Pore size (0.22μm, 0.45μm)
  • •Two color of purple and orange
  • •Wide chemical compatibility range

Applications

  • •Vacuum pump line protection
  • •Suitable for the filtration of corrosive, strong acid, and strong alkali chemicals

Technical Data
Filter Media Hydrophobic PTFE
Diameter 4mm 13mm 25mm 33mm 50mm
Housing Medical PP Medical PP Medical PP Medical PP Medical PP
Pore Size 0.1μm, 0.22μm, 0.45μm, 1.0μm, 3.0μm, 5.0μm, 10μm
Filtration Area 0.2cm2 1.3cm2 4.9cm2 8.5cm2 19.8cm2
Maximum Pressure 5.2bar 5.2bar 5.2bar 5.2bar 5.2bar
Process Volume 2mL 10mL 100mL 200mL 5000mL
Pre-filter 1μm GF or PP 1μm GF or PP 1μm GF or PP 1μm GF or PP 1μm GF or PP
Hold-up Volume < 10μL < 50μL < 100μL < 200μL < 350μL
Inlet Female Luer Lock Female Luer Lock Female Luer Lock Female Luer Lock Stepped barb
Outlet Male luer slip Male luer slip Male luer slip Male luer slip Stepped barb

Ordering Information
Item Code Pore Size(μm) Diameter(mm) Sterile Quantity/pk
WPT1322NB 0.22 13 No 100pcs
WPT1345NB 0.45 13 No 100pcs
WPT2522NB 0.22 25 No 100pcs
WPT2545NB 0.45 25 No 100pcs

Sterile PTFE Syringe Filter

Description of Sterile PTFE Syringe Filter

The outstanding consistency of the hydrophobic PTFE membrane can ensure important application requirements. These filters are widely used in biology, medicine, and other fields.

Features of Sterile PTFE Syringe Filter

  • •Provide regular size sterile syringe filter: 0.22 μm and 0.45 μm PTFE syringe filter
  • •Sterile hydrophobic filter
  • •High flow rate at a low inlet pressure
  • •Require pre-treatment with alcohol before being suitable for aqueous or high aqueous/organic samples.
  • •Unlike sterile GF syringe filters, sterile hydrophobic PTFE syringe filters are resistant to organic solvents and strong acids.

Applications

  • •Degassing solvents
  • •Aggressive solvents, acids, and bases
  • •Venting applications, sterilize air, gases, aerosols
Technical Data
Filter Media Sterile Hydrophobic PTFE
Pore Size, μm 0.1μm, 0.22μm, 0.45μm,1.0um, 3.0μm, 5.0μm, 10.0μm
Diameter 4mm 13mm 25mm 33mm 50mm
Housing Medical PP Medical PP Medical PP Medical PP Medical PP
Filtration Area 0.2cm2 1.3cm2 4.9cm2 8.5cm2 19.8cm2
Maximum Pressure 5.2bar 5.2bar 5.2bar 5.2bar 5.2bar
Process Volume 2mL 10mL 100mL 200mL 5000mL
Hold-up Volume < 10μL < 50μL < 100μL < 200μL < 350μL
Inlet Female Luer Lock Female Luer Lock Female Luer Lock Female Luer Lock Both inlet and outlet is 7-13mm stepped hose barb connection with 6:100 Luer slip
Outlet Male luer slip Male luer slip Male luer slip Male luer slip
Flow Direction Flow should enter from the inlet Both is fine
Maximum Operating Temperature 60°C
Sterilization Gamma Irradiation
Endotoxin ≦0.25 EU/ML

Ordering Information
Item Code Pore Size(μm) Diameter(mm) Sterile Pre-filter Quantity/pk
SLPT1322SB 0.22 13 Yes No 100pcs
SLPT1345SB 0.45 13 Yes No 100pcs
SLPT1322SP 0.22 13 Yes PP 100pcs
SLPT1345SP 0.45 13 Yes PP 100pcs
SLPT1322SG 0.22 13 Yes GF 100pcs
SLPT1345SG 0.45 13 Yes GF 100pcs
SLPT2522SB 0.22 25 Yes No 100pcs
SLPT2545SB 0.45 25 Yes No 100pcs
SLPT2522SP 0.22 25 Yes PP 100pcs
SLPT2545SP 0.45 25 Yes PP 100pcs
SLPT2522SG 0.22 25 Yes GF 100pcs
SLPT2545SG 0.45 25 Yes GF 100pcs
Download All Ordering Information